It is necessary to press the RESET button prior to initial programming.
This button is located behind the cover on the front of the unit.
4. Setting the date and time
Lower the cover on the front of the unit.
Move the selector switch to the CLOCK SET position.
buttons to select the day.
buttons to select the month.
buttons to select the year.
buttons to select the hour.
buttons to select the minute.
buttons to select 5/2D, 7D or 24H
The date, time and function are now set. Move the selector switch to the
RUN position to run the program, or to the PROG SET position to change
the program setting.
Important: Keep this document
This 1 zone timeswitch is designed to
provide ON/OFF control for 1 zone, with
the value added application of in built
frost protection.
EPH Controls Ireland
Sitecast Industrial Estate, Pouladu ,
Cork, T12 W665, Ireland
sales@ephcontrols.com www.ephcontrols.com
5. ON/OFF period selection
There are 4 modes available on this timeswitch for users to choose for their
individual application.
The timeswitch operates 3 'ON/OFF' periods per day.
ALL DAY The timeswitch operates 1'ON/OFF' period per day.
This operates from the rst ON time to the third OFF time.
The timeswitch is permanently on. **ON**
The timeswitch is permanently o . **OFF**
Lower the cover on the front of the unit. By pressing the
you can change between AUTO / ALL DAY / ON / OFF for Zone 1.
6. Adjusting the program settings
Lower the cover on the front of the unit.
Move the selector switch to the PROG SET position.
You can now program zone 1.
Repeat this process to adjust the ON & OFF times for P2 & P3.
When completed, move the selector switch to the RUN position.
7. Copy function
Copy function may only be used if the timeswitch is in the 7d mode.
Lower the cover on the front of the timeswitch.
Move the selector switch to the PROG SET position.
Set the ON & OFF times for the day of the week you wish to copy from.
button for 2 seconds. The next day of the week will begin to
button to copy the ON & OFF times to this day.
button to skip a day.
ON & OFF times can be copied to muliple days by using the
button when copying has been completed.
When completed, move the selector switch to the RUN position.
EPH Controls UK
Unit E4, Welland Business Park, Valley Way, Market Harborough,
Leicestershire, LE16 7PS, United Kingdom
sales@ephcontrols.co.uk www.ephcontrols.co.uk
Page 1 of 2
Operating Instructions
Before commencing, disconnect the
device from the mains. There are parts that
carry mains voltage behind the cover. Never
leave unsupervised when it is open. (Prevent
non specialists and especially children from
gaining access to it.)
Never remove this product from the
electrical baseplate. Disconnect from mains
supply in the event of any damage to any
buttons. Do not use sharp tools to push any
buttons to adjust the P1 ON time.
buttons to adjust the P1 OFF time.
1 zone timeswitch (28 pages)
1 zone programmer (2 pages)
1 zone timerswitch (2 pages)
Boost timer pro (16 pages)
1 zone timeswitch (28 pages)